| Roof Type |
Emergency Repair (underwater) |
Long Term Repair |
| BUR with gravel |
Spud back gravel Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply a thin coat of M-1 with a trowel Trowel in polyester and finish layer of M-1 Warranty patch if required * Reapply gravel |
| BUR with cap sheet |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply a thin coat of M-1 with a trowel Trowel in polyester and finish layer of M-1 Warranty patch if required * Resurface with granules or coating |
Modified Bitumen - granulated APP or SBS |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply a thin coat of M-1 with a trowel Trowel in polyester and finish layer of M-1 Warranty patch if required * Resurface with granules or coating |
Modified Bitumen - smooth or BUR smooth |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply a thin coat of M-1 with a trowel Trowel in polyester and finish layer of M-1 Surfacing optional - coating Warranty patch if required * |
| EPDM - ballasted |
Remove ballast Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply EternaBond black tape Apply pressure with roller Warranty patch if required * |
| EPDM - nonballasted |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply EternaBond black tape Apply pressure with roller Warranty patch if required * |
| PVC |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply EternaBond white tape Apply pressure with roller Warranty patch if required * |
| TPO |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply EternaBond white tape Apply pressure with roller Warranty patch if required * |
| Coal Tar Pitch |
Spud gravel Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply a thin coat of M-1 with a trowel Trowel in polyester and finish layer of M-1 Warranty patch if required * Reapply Gravel |
| Sprayed Urethane Foam |
Remove loose coating or surfacing Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Cut out loose or broken foam Fill with 1-Part Pourable Sealer and allow 24 hours to cure OR Warranty patch if required * Match surfacing or coating |
| Metal Roofs, Flashings, and Penetrations |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply M-1 or DuraLink Trowel in polyester Finish repair with M-1 or DuraLink Allow to cure 24 hours Coat to match metal roof |
| TAPE Repairs to Metal Roofs, Flashings and Penetrations |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol Apply EternaBond Web Seal at least 2" outside M-1 repair Coat to match metal roof |
| Penetrations and Pitch Pans |
Use brush or rag to clean dirt Apply M-1 Structural Sealant with Trowel |
Clean with alcohol No leaks - Refill pitch pan with 1-Part Leaks - Remove and install a ChemCurb |
| * Notes: |
1) Warranted Roofs require repairs approved by the System Manufacturer.
2) Warranted Repairs may be installed over M-1, DuraLink, and the EternaBond tapes.
Contact the System Manufacturer on this procedure.
|
| |
Paul Graham |
Lee Moore |
| Office: |
817-922-8242 |
817-790-7833 |
| Cell: |
817-475-6126 |
817-925-8162 |
| Toll Free: |
888-600-9716 |